Protart provides support to design lightning protection of projects within the needs of our clients. Our designing services are:
-Drawing Lightning Protection Installation
-Determining Needs for Lightning Protection and Grounding
Our innovative factory always seek to produce new products to supply our clients’ demands. For some projects that needs special designed or dimensioned we are able to produce
Even for some products that are not within our standard product range, we are able to produce special designed products within necessities of our clients.
Protart organizes regular trainings for distributors to share its experiences and provide safest solutions to all over the world. Technical or skills training programs are given around the themes of protection against lightning.
Exothermic Welding Materials The materials to be used for exothermic welding shall have the following properties. All connection points remaining below ground (connections between grounding electrodes and down conductors etc.) shall be provided by exothermic welding method. Welding powder shall be fired by electronic methods (with an electronic flint gun) at a given distance as1 April 2020
Lightning Protection The principle consists of creating one or more preferred impact points for a lightning strike using low impedance conductor elements. These then conduct and dissipate the lightning current into the ground. This coherent system enables the lightning to be captured and dissipated whilst providing protection to the structure. There are four types of1 April 2020
Earth Conductivity Material (PRO-Earth) Ions enable electrical flow in the ground. The grounding system and its surroundings must be able to regulate rapid ion flow. If the movement of ions in the ground is low, the resistance will be high and the current will not flow easily. In an ideal grounding system, grounding resistance must1 April 2020
Foundation of Grounding Foundation grounding is one of the most important grounding methods known ever. Foundation grounding of buildings must be started at the beginning of construction (at foundation stage). This is performed by laying a galvanized conductor between reinforcing bars. This conductor is connected to reinforcing bars at certain distances. The ends of this1 April 2020